- DOWNLOAD AVS HD 709 CALIBRATION DISC HOW TO
- DOWNLOAD AVS HD 709 CALIBRATION DISC MANUAL
- DOWNLOAD AVS HD 709 CALIBRATION DISC FULL
- DOWNLOAD AVS HD 709 CALIBRATION DISC SOFTWARE
Using a set up disc like AVSHD709 is a good idea.
I found the 2.2.11 version, but there was no release notes for it.Click to expand.Hi Roger44. The 75% chaper on the AVSHD disc, are those 75% saturation or intensity? My findings would indicate intensity, but I am unsure. 709 option on Color Management is broken.ĭon't try to use it until we release a fix.Īny ETA? I would be very interested in getting the fix as soon as possible.Īnd again, just to be 100% sure, the right way to use the 75% Rec 709 setting is to use 75% saturated RGBYCM patterns with a 100% white pattern? Or was the white pattern intensity not of importance? Thanks for the tip! I do have an HDMI output on my laptop so its a no-brainer.
DOWNLOAD AVS HD 709 CALIBRATION DISC FULL
I'll try again on the pro2 setting and run another full calibration as it "should" be done and then compare again. The advanced CMS diagnose shows a MUCH better saturation linearity overall with the approach of calibration from the default color intensity settings. In fact those poor results was what drove me to experiment in this matter. I did not get that result when I calibrated earlier with color intensities adjusted prior to CMS calibration. Well, I had another look at my TV yesterday and the calibrations seems better than ever with very lifelike skintones and such. Don't try to use it until we release a fix. 709 option on Color Management is broken. You setup an extended desktop using the PC monitor for CP and the TV as the second monitor on to which you drag the test patterns. I have no idea what results this would have.
DOWNLOAD AVS HD 709 CALIBRATION DISC SOFTWARE
Maybe it is a software problem that is causing my woes? When do you hope to have release of the fix?ĭon't do this. Use another computer to run those?ītw, could you please be more specific to what issues you have found in CP? It may be directly related to the problems I have.
DOWNLOAD AVS HD 709 CALIBRATION DISC HOW TO
How am I supposed to run the internal patterns in CP as I use that display for the user interface? I am not clear on how to solve that. I could not run the intensity checks in the advanced CMS section as I have no patterns on disc for those.
So I tried calibration at that default setting and decreased lightness a lot instead. However if I decrease the setting to what is appropriate prior to CMS calibration - the linearity gets way off. I've used advanced CMS to check saturation linearity and it is OK at the default color intensity setting. These have been fixed and will be included in our next release, which should be out in a week or two.ĬhromaPure calibration software & meter packages at discounted prices! There are some problems with this selection in the latest build of CP. Use Advanced Color Managment to diagnose color problems. You can also use the CP internal test patterns for this.
There has been some report of CMS errors in the pannys though so it might be the set itself that has bad CMS handling. Whites looks ok, skintones etc seem too orange-reddish. Even though I have dE under total control in both white point, grayscale and CMS the image is still visibly off. The reason I ask for confirmation on my approach is that I have some huge problems getting proper color on my Panasonic VT30. There are the intensity and saturation variants and which to use was not clear to me.
DOWNLOAD AVS HD 709 CALIBRATION DISC MANUAL
The manual does not cover what exact patterns to use for this calibration. I use a 100% intensity pattern for white, and the 75% saturated patterns from the saturations chapter on the disc. These seem to be the ones to use (the 75% saturated ones)Īnyway, this is how I have done it. Maybe thay are 75% intensity, not saturation? There are other patterns under the headline "Saturation" on the disc. There are some 75% color patterns there but they seem snot appropriate. I use the AVS HD 709 test patterns disc for this.
I am trying to understand how one should do calibration at the 75% Rec.
0 kommentar(er)
